SONAX PROFILINE HyperCoat is a highly concentrated wet sealant and drying aid designed
to add gloss, slickness, and strong water repellency immediately after washing.
Simply dilute, spray onto the wet vehicle, and rinse immediately. HyperCoat quickly
creates a hydrophobic protective layer that helps water sheet away faster, reduces
dirt adhesion, and makes the final drying process quicker and easier.
With an impressive 1:100 to 1:200 dilution ratio, one liter of concentrate
can produce up to 200 liters of usable solution, making HyperCoat especially attractive
for professional detailers, high-volume wash operations, and enthusiasts looking for
excellent cost efficiency.
Key Features
Ultra-concentrated 1:100 to 1:200 dilution ratio
Produces up to 200 liters of usable sealant from one liter of concentrate
Creates immediate hydrophobic water beading and sheeting
Helps speed up vehicle drying
Reduces towel drag during the drying process
Restores gloss, slickness, and visual depth
Helps repel water, dirt, and road grime
Refreshes and boosts existing ceramic coatings, sealants, and waxes
Suitable for gloss and matte finishes
Safe for PPF, vinyl wraps, exterior plastics, wheels, and glass
Why HyperCoat?
HyperCoat combines protection and drying assistance into a single fast step. After the
vehicle has been washed and rinsed, the diluted product is applied directly to the wet
exterior and immediately rinsed away.
The treated surface becomes noticeably more hydrophobic, allowing water to evacuate more
quickly and leaving less standing water behind to dry. This can reduce drying time while
also adding a slick, freshly protected finish.
Ideal For
Professional detailing shops
Mobile detailers
Maintenance washes
Ceramic-coated vehicles
Waxed and sealed vehicles
Gloss paint
Matte paint
Paint protection film (PPF)
Vinyl wraps
Exterior plastics
Wheels
Exterior glass
How To Use
Wash and rinse: Thoroughly clean the vehicle and rinse away all shampoo
and cleaning residue. Leave the vehicle wet.
Dilute: Mix HyperCoat with clean water at a ratio of 1:100 to 1:200.
This equals approximately 5 to 10 ml of concentrate per liter of water.
Apply: Spray the diluted solution evenly over the wet exterior surfaces.
Rinse immediately: Rinse the treated area thoroughly with water.
Do not allow the product to dry on the surface.
Dry: Finish with a clean microfiber drying towel or vehicle dryer.
Product Details
Brand
SONAX PROFILINE
Product
HyperCoat
Product Type
Concentrated Wet Sealant & Drying Aid
Dilution
1:100 to 1:200
Yield
Up to 200 liters of usable solution per 1-liter bottle
