Description: SEM Solve (Part No. 38374) is a high-performance, ready-to-use solvent blend crafted to prep automotive panels prior to refinishing or repair. This clear liquid quickly strips away adhesive residue, wax, grease, road tar, silicone, overspray, bugs, and more—without leaving any residue behind.
Trusted for both shop and DIY use, SEM Solve works effectively on bare steel, aluminum, primed or painted surfaces, and SMC/plastic (limited exposure recommended). With a flash point of just 10 °F and VOC content of 765.3 g/L, it’s powerful—handle with care.
For full technical and safety data, including handling and hazard information, view the SDS here
Specifications – 20 oz Aerosol:
Part No.: 38373
Size: 20 oz
Form: Aerosol (Clear)
VOC Content: 765.3 g/L
Flash Point: -103°C
Specifications – 1 Quart:
Part No.: 38374
Size: 1 quart
Form: Liquid (Clear)
VOC Content: 765.3 g/L
Flash Point: 10°C
Specifications – 1 Gallon:
Part No.: 38375
Size: 1 gallon
Form: Liquid (Clear)
VOC Content: 765.3 g/L
Flash Point: 10°C
Instructions (all sizes):
Shake (aerosol) or stir (liquid) before use
Apply directly to the surface or onto a clean, lint-free cloth
Wipe in one direction to lift contaminants
Do not over-saturate surfaces
Repeat if necessary for heavy contamination
Avoid prolonged contact with sensitive materials
Suitable Surfaces:
Bare steel and aluminum
OEM and refinished panels
Glass
Select plastics and SMC (limited contact)
Instructions:
Apply directly to the surface or to a clean, lint-free cloth.
Wipe in one direction to lift contaminants—don’t over-saturate.
If SEM Solve begins to dry, re-wet and wipe again.
Do not leave solvent-soaked cloths on painted surfaces.
Safety & Handling Notes:
Highly flammable; vapor may ignite. Keep away from heat, spark, and open flames.
Use only in well-ventilated areas.
Wear protective gloves and eye protection.
Dispose of used materials in accordance with local regulations.
